Natural Stone Care And Restoration – With over 30 years of experience, we care and restore all natural stones. We serve clients in Beverly Hills, Rancho Palos Verdes, Palos Verdes Estates, Hermosa Beach, Manhattan Beach, Redondo Beach, Torrance, El Segundo and surrounding areas.
There is no other material in the world like natural stone. Natural rocks formed by geological forces over millions of years. was excavated from different parts of the world to enter our daily life in the form of slabs. floor tiles and many other building materials. It is one of the most beautiful and durable building materials.
Natural Stone Care And Restoration
Although natural stone is durable. But it needs special care and protection to ensure it stays beautiful and usable throughout its lifespan.
Some Trade Secrets Of Natural Stone Restoration & Cleaning |
Using an experienced and suitable stone restoration specialist will ensure that the stone is restored to its original beauty and luster using the right techniques and products. Travertine differs from granite, slate, marble, limestone and natural stone. Other types Each species has specific cleaning, care and restoration needs.
Natural stone slabs must be properly maintained so as not to damage the surface of the stone. Many common household cleaners can permanently damage natural stone. Leaves a dull or white mark on the stone.
In many cases, a professional restoration process is required to bring the stone back to its original state.
Restoration of marble, granite, limestone, travertine or other natural stone. in connection with the removal of scratches and/or other damage off the surface of the stone Grinding is done by mechanical abrasion known as diamond grinding. The grinding process is often used to remove “slag” from the bedrock.
Carrara Marble Restoration Project
Lippage usually occurs during the installation process. where one plate is mounted slightly higher or lower than adjacent plates, creating a grinding “lip” to remove the burrs and create a smooth surface to continue the restoration process.
Grinding is a continuous process of the grinding process. It uses finer and more precise abrasives to achieve a more consistent surface to the rock. Readings can be performed using diamonds, abrasive powders or sandblasting sieves. depending on the condition of the stone Readers can leave the stone dull. even finish or fabric depending on the desired look
Grinding is more than a polishing process. Finer abrasives are used to achieve a shiny finish on the stone surface. Bringing it to this level further enhances the natural beauty of the stone surface. while the polishing process still uses finer abrasives. The reflection of the stone was better. resulting in a mirror-like surface This will make the surface of the stone smaller and help prevent stain absorption.
Sealing natural stone is one of the most important ways to prevent permanent stains and discoloration. The perforated sealer and coating fill the porosity of the rock and help repel dirt and surface delamination. Most natural stones should be sealed every 18-24 months to maximize protection. and reduce the occurrence of permanent stains and damage as well as ceramic tiles Natural stone is one of the most abused and neglected floor and wall materials in homes. take part in cleaning A mark on a polished marble or marble floor can always remind you that Grandma wasn’t always right about the benefits of cleaning with vinegar and a water solution.
Wondering How To Get Those Counters Really Clean?
The good news is that Janssen can do that short job. Whether you have natural stone in your kitchen, bathroom, or other areas of your home, stubborn stains and clouds won’t happen. Your natural stone will look as beautiful as the day it was installed.
At Janssen, we’re here to help keep your home healthy, clean and looking its best. Our processes are environmentally friendly and sustainable. Natural stone polishing, cleaning and sealing solutions made easy. just call
Janssen’s technicians are true craftsmen. with extensive training and experience and regularly educate yourself on the most effective steps for recovery. maintenance and hard surface protection Janssen technicians are certified tile and stone restoration specialists qualified for advanced stone restoration and repair.
We have pioneered the use of environmentally friendly and sustainable methods for your hard surface restoration needs. Our system can be used for small or very large jobs. From small bathroom counters to large commercial spaces. These systems will significantly restore and strengthen your stone with lasting results.
Marble Polishing, Stone & Tile Restoration
Act quickly! Delays can cause permanent scarring. Blot the liquid with a dry white absorbent cloth or white toilet paper. Gently fold the semi-solid product with a round spoon. Dissolve solids and vacuum
Warm water – in most cases It’s best to use warm tap water to wash away the cleaning solution from the fibers. The complete absence of the solution from the fibers can lead to rapid contamination.
Vinegar solution – Mix one (1) cup white vinegar with two (2) cups water. White vinegar is a 5% solution of acetic acid. It is often used to reduce alkalinity caused by detergent solutions or alkaline spills.
Black Spot Removal Kit – Available at Janssen, Follow the Instructions Carefully! Some stain remover kits contain: (A) detergent and (B) stain remover. Using solution (B) before the stain is completely removed may result in permanent staining. Other stain removal kits There may be a dry extract cleaning ingredient that can be used effectively for common household stains.
Natural Stone Care
Call the Experts – Janssen has the ability and equipment to handle more aggressive solutions to remove stubborn stains.
Many stain removers leave stains on the carpet. Wash the area several times with boiling water. It is recommended to use a mist sprayer to prevent over-wetting. Blot dry with toilet paper. and wipe dry after each wash Several flushes are often required to remove residue. Do not use any solution above the recommended concentration.
IMPORTANT – Always read and follow the care instructions and warnings provided by the carpet or rug manufacturer. Rugs and upholstery with natural fibers and/or certain colors or textures may require special care. If in doubt, please contact Janssen for advice/service first. Do not follow stain removal instructions without knowing the exact nature of the stain. Do not use any retail products. to remove stains on carpets or upholstery without advice from the manufacturer, otherwise your warranty may void.
Detergent – Mix a quarter (1/4) teaspoon of dishwashing liquid in one (1) cup of warm water. Do not use a higher concentration! A thorough rinsing is necessary to quickly remove any detergent stains that may stain it. You may need to wash several times with hot water. times to remove all the stains. (See the rest of the precautions.) Care should be taken when choosing detergents. Do not use any type of laundry detergent. This is because detergents may contain optical brighteners. (fluorescent dyes) that color the fibers Do not choose an automatic dishwasher. Because most of them contain bleach that destroys some colors and fibers.
Marble Polishing & Floor Tile Cleaning
Please note: Remember that ammonia, if used incorrectly, can cause discoloration. Be sure to check the hidden areas.
Solutions – A non-flammable stain remover or dry cleaning solution is recommended. Be careful when using solvents. Do not pour directly onto the carpet or allow it to come into contact with the underlayment as this may damage the latex that holds the base mat and the underlayment together. Acceptable solvents include Carbona®, Energine®, K2R®, Goof-Off® and others.
Detergent – Mix a quarter (1/4) teaspoon of dishwashing liquid in one (1) cup of warm water. Do not use a higher concentration! A thorough rinsing is necessary to quickly remove any detergent stains that may stain it. You may need to wash several times with hot water. times to remove all the stains. (See the rest of the precautions.) Care should be taken when choosing detergents. Do not use any type of detergent. This is because detergents may contain optical brighteners. (fluorescent dyes) that color the fibers Do not choose an automatic dishwasher. Because most of them contain bleach that destroys some colors and fibers.
Nail polish remover – There are two types of nail polish remover. One type contains acetone, which is a dry cleaning solution. Use the same precautions as other dry cleaning agents. The second type contains amyl acetate. which is used in paint cleaners Lots of Oils and Greases (POGs) Many POG cleaners leave a residue that can quickly cause contamination. When using POG cleaners, always wash the area thoroughly with dry solvent. (See the rest of the precautions.)
Santa Barbara Stone Masters’ Natural Stone Restoration Blog
Acidic toilet cleaner, acne medication, alkaline water drain cleaner Chlorine bleach, hair dye, iodine, pesticides, turmeric mustard, fertilizers and similar stains cannot be removed as they will permanently discolor carpets. call a professional Perhaps the only solution is to get a rug from the closet or somewhere else over the affected area.
Carpet manufacturing method Fibers are inserted into the back of the carpet to create cuts and/or piles.
Brick and stone restoration, natural stone floor restoration, natural stone restoration, stone and tile restoration, stone and marble restoration, classic marble and stone restoration, stone restoration nyc, stone restoration, stone cleaning and restoration, natural stone and grass, natural stone restoration houston, koszo tile and stone restoration
